LEONARDO - Extracting Data of Simulation files

Post here for very basic questions and request for help...
But: BEFORE you post, read the older posts if your question hasn't been answered before.
Please be specific. Q like "I don't understand ENVI-met" will most likely be ignored.
flex2808
Posts: 13
Joined: Sat Jun 20, 2020 7:37 am

LEONARDO - Extracting Data of Simulation files

Postby flex2808 » Fri Jun 26, 2020 11:47 am

Dear ENVI-met community,


I have a question about extracting data about individual grids in LEONARDO.
I know how to get data about individual grids and how to save this data in Excel, for example. But is it also possible to not only display the data of one grid, but for example several grids at the same time?
I want to make a time comparison of an area or a house in the form of data and would therefore like to extract several grids at the same time.

Thank you for helping me and have a nice weekend.

flex2808
Posts: 13
Joined: Sat Jun 20, 2020 7:37 am

Re: LEONARDO - Extracting Data of Simulation files

Postby flex2808 » Fri Jun 26, 2020 1:15 pm

I found that in this Forum:
" Hi Sham,

If there are only a few points, I would simply add receptors at those locations and the receptors give you a text file for every height and every timestep.
If it is a large area of only one height and one timesteps, you could extract the data via Export map layer or Map Script. There are some posts about that already.
If it is a large area with multiple height and or multiple timesteps, I would activate netcdf outputs and analyse the netcdf file e.g. with R.

Best regards,
Tim"


for me it is like that I would like to have extracted the data of all my grids at any time of the day. How can I activate the netcdf outputs ?

Tim
Posts: 1496
Joined: Mon May 15, 2017 3:46 pm

Re: LEONARDO - Extracting Data of Simulation files

Postby Tim » Fri Jun 26, 2020 2:52 pm

Hi,

You can activate it in the output settings in the Advanced section of the ENVIguide... described e.g. here only one day ago: http://www.envi-hq.com/viewtopic.php?f=31&t=3398&sid=c3f81fc63254c60e4b970dd938fc0325.

Best regards,
Tim

flex2808
Posts: 13
Joined: Sat Jun 20, 2020 7:37 am

Re: LEONARDO - Extracting Data of Simulation files

Postby flex2808 » Sun Jun 28, 2020 7:43 am

Tim wrote:Hi,

You can activate it in the output settings in the Advanced section of the ENVIguide... described e.g. here only one day ago: http://www.envi-hq.com/viewtopic.php?f=31&t=3398&sid=c3f81fc63254c60e4b970dd938fc0325.

Best regards,
Tim


Thank you for helping Tim! Is this option also available in the beginner mode? Or only in the advanced level?

flex2808
Posts: 13
Joined: Sat Jun 20, 2020 7:37 am

Re: LEONARDO - Extracting Data of Simulation files

Postby flex2808 » Sun Jun 28, 2020 7:52 am

Tim wrote:Hi,

You can activate it in the output settings in the Advanced section of the ENVIguide... described e.g. here only one day ago: http://www.envi-hq.com/viewtopic.php?f=31&t=3398&sid=c3f81fc63254c60e4b970dd938fc0325.

Best regards,
Tim


if I want to activate the output settings in the advanced level I can no longer click on "next". Is it because I only use the Lite version of ENVI-met?
Attachments
Output Settings.png

Tim
Posts: 1496
Joined: Mon May 15, 2017 3:46 pm

Re: LEONARDO - Extracting Data of Simulation files

Postby Tim » Mon Jun 29, 2020 5:42 am

Hi,

No, you need to click on the now visible button of output settings where you need to make your changes before being able to move on.

Best regards,
Tim

flex2808
Posts: 13
Joined: Sat Jun 20, 2020 7:37 am

Re: LEONARDO - Extracting Data of Simulation files

Postby flex2808 » Wed Jul 01, 2020 5:59 am

Tim wrote:Hi,

No, you need to click on the now visible button of output settings where you need to make your changes before being able to move on.

Best regards,
Tim


Thanks for helping!


Return to “Beginner's Corner”

Who is online

Users browsing this forum: No registered users and 1 guest